BS EN ISO 12100:2010


Safety of machinery. General principles for design. Risk assessment and risk reductionBritish Standard / European Standard / International Organization for Standardization / 31-Dec-2010 / 90 pages ISBN: 9780580742620

BS EN ISO 12100:2010 specifies basic terminology, principles and a methodology for achieving safety in the design of machinery. It specifies principles of risk assessment and risk reduction to help designers in achieving this objective. These principles are based on knowledge and experience of the design, use, incidents, accidents and risks associated with machinery. Procedures are described for identifying hazards and estimating and evaluating risks during relevant phases of the machine life cycle, and for the elimination of hazards or the provision of sufficient risk reduction. Guidance is given on the documentation and verification ofthe risk assessment and risk reduction process.
BS EN ISO 12100:2010 is also intended to be used as a basis for the preparation of type-B or type-C safety standards. It does not deal with risk and/or damage to domestic animals, property or the environment.
NOTE 1 Annex B gives, in separate tables, examples of hazards, hazardous situations and hazardous events, in order to clarify these concepts and assist the designer in the process of hazard identification.
NOTE 2 The practical use of a number of methods for each stage of risk assessment is described in ISO/TR 14121-2.

Cross References:
IEC 60204-1:2005
ISO/IEC Guide 51
ISO 447
ISO 2972
ISO 4413
ISO 4414
ISO 6385
ISO 7000
ISO 9355-1
ISO 9355-3
ISO 10075
ISO 10075-2
ISO/TR 11688-1
ISO 11689
ISO 13849-1:2006
ISO 13850
ISO 13851
ISO 13854
ISO 13855
ISO 13856
ISO 13857
ISO 14118:2000
ISO 14119
ISO 14120:2002
ISO/TR 14121-2
ISO 14122
ISO 14122-3
ISO 14123-1
ISO 14163
ISO 15667
IEC 60079-11
IEC 60204
IEC 60335-1
IEC 60745-1
IEC 60947-5-1
IEC 61000-6
IEC 61029
IEC 61310
IEC 61496
IEC 61508
IEC/TS 62046
IEC 62061
IEC 62079
IEC 60050-191
CR 1030-1
EN 614-1
EN 1299
EN 12198-1
EN 12198-3
EN 13861

All current amendments available at time of purchase are included with the purchase of this document.

Keywords: Equipment safety; Occupational safety; Hazards; Safety measures ; Risk assessment; Design; Product design; Ergonomics; Accident prevention; Control systems; Control devices; Safety devices ; Machine guards; Instructions for use; Handbooks; Marking
Product Code(s): 30240710,30240710

Add to Cart:

  • Model: ZKEFVL4H
  • 8888 Units in Stock

This product was added to our catalog on Thursday 01 January, 1970.

Your IP Address is:
Copyright © 2018 Buy Standards.